Desktop Expansion Board Installation
Install expansion boards into the desktop system as follows.
Remove the top cover as previously described.
1.
Remove the expansion slot screw and cover (see Figure Section 3-8). Save the
2.
expansion slot cover in the event the expansion board is removed in the future.
To remove the expansion slot cover on the inside of the ISA/VL-Bus backboard,
remove the backside expansion slot screws shown in Figure Section 3-10.
ISA/VL-Bus
Slot
**
ISA Slot
*
For three-quarter length boards.
**
For half-length boards.
Other slots are full length.
ISA Slot
Figure Section 3-8 Desktop Expansion Slots
ISA Slots*
Options
3-5