Power Menu; Power Management Parameters - NEC POWERMATE 4100M Service Manual

2-20 Setup and Operation

Power Menu

Selecting "Power" from the menu bar displays a screen with the power management pa-
rameters described in the following table.
A power-management system reduces the amount of energy used after specified periods of
inactivity. The Power menu supports a Full On state, a Standby state with partial power re-
duction, and a Suspend state with full power reduction.
Use the Power menu to specify the settings for Power Management.
Use the legend keys to make the selections and exit to the Main Menu. Use the following
chart in making the selections.
Table Section 2-13 Power Management Parameters
Feature
Power
Savings
Mode
Standby
Timeout
Suspend
Timeout
Standby CPU
speed
Fixed Disk
Timeout
CRT
IRQ1...IRQ15
Options
Disabled
Customize (default)
Max. Power Savings
Med. Power Savings
Min. Power Savings
Disabled (default)
User Selectable
Disabled (default)
User Selectable
Disabled
Max/3 (default)
Max/4
Disabled (default)
User Selectable
Disabled
Enabled (default)
Disabled
Enabled
Description
Max., Med., and Min. set power-management
options with predefined values. Select Customize
to make the own selections from the following
fields. Disabled turns off all power management.
Inactivity period required to put system in
Standby (partial power shutdown)
Inactivity period required after Standby to
Suspend (maximum power shutdown)
Sets processor speed during Standby. Max/3
divides speed by 3, Max/4 by 4.
Inactivity period of fixed disk required before
standby (motor off)
Blanks out CRT in Standby mode
During Suspend, enabled IRQ turns on processor
clock