Speaker Assembly Removal; Speaker Tabs - NEC POWERMATE 4100M Service Manual

Speaker Assembly Removal

Remove the speaker per Figure Section 6-8 and the following steps.
1. Remove the top cover as previously described.
Unplug the speaker connector P6 on the system board.
2.
Slide the speaker over the raised spot and out from the speaker tabs (see
3.
Figure Section 6-8).
Remove the speaker from the system unit.
4.
1 of 3
Tabs
Raised
Spot
Figure Section 6-8 Speaker Tabs
Minitower Repair 6-9