Minitower Peripheral Connections; Minitower Indicators, Reset Button, And Power Button - NEC POWERMATE 4100M Service Manual

2-6 Setup and Operation
2. Connect the keyboard and mouse cables to the back of the system unit (see
Figure 2-6).
3. Connect the monitor and any other peripherals to the rear panel (see Figure 2-6).
Detailed monitor connections a given in Sections 3, Options.
Expansion
Slot Covers
Figure Section 2-5 Minitower Peripheral Connections
Press the power button to power-on the system (see Figure 2-8). The user lamps
4.
and reset button are also identified in the figure.
Power
Lamp
Reset
Button
Figure Section 2-6 Minitower Indicators, Reset Button, and Power Button
15-Pin VGA
Monitor Connector
Parallel
Printer Port
Serial Port 2
Serial Port 1
Keyboard Port
Mouse Port
Hard Disk Drive
Busy Lamp
Power
Button