Minitower Blank Panel Removal - NEC POWERMATE 4100M Service Manual

Minitower Blank Panel Removal

Remove the front panel assembly from the desktop chassis as follows.
1. Remove the minitower cover as previously described.
From the inside of the front panel, release the blank panel tabs and remove the
2.
blank panel from the front panel (see Figure Section 3-29).
1 of 2
Tabs
Figure Section 3-29 Minitower Blank Panel Removal
NOTE: Do not remove the 5 1/4-inch blank
panel when installing a hard disk drive.
The 3 1/2-inch hard disk drives must be mounted
in a 5 1/4-inch bracket.
Options 3-31
Front Panel
(inside view)
Blank Panels