Inch Diskette And Hard Disk Drive Screws - NEC POWERMATE 4100M Service Manual

5. Remove the four 3 1/2-inch diskette drive screws; two on each side of the drive
bracket (see Figure Section 5-17).
Remove the two 3 1/2-inch hard disk drive screws; two on each side of the drive
bracket (see Figure Section 5-17).
6. Pull the drives out from the front of the bracket.
2 of 4
Diskette
Drive Screws
2 of 4
Hard Disk
Drive Screws
Figure Section 5-17 3 1/2-Inch Diskette and Hard Disk Drive Screws
Desktop Repair
3 1/2-Inch
Diskette Drive
3 1/2-Inch
Hard Disk Drive
5-13