Minitower Setup; Minitower Voltage Selector Switch - NEC POWERMATE 4100M Service Manual

Minitower Setup

Set up the minitower systems by making the following connections. (See the preceding sub-
section, Desktop Setup, if setting up a desktop computer).
1. At the rear of the system, set the voltage selector switch to 115V or 230V and in-
sert the power cord into the power socket (see Figure 2-5).
Voltage Selector
Switch
Figure Section 2-4 Minitower Voltage Selector Switch
CAUTION: The correct AC input voltage must
be properly set. Select the appropriate voltage
with the voltage selector switch located at the
rear of the system.
Setup and Operation
System Power
Socket
2-5