ZyWALL 2 Series User's Guide
17.16 Configuring Security
To change your ZyWALL's Security settings, click REMOTE MGNT, then the Security tab. The screen
appears as shown.
If an outside user attempts to probe an unsupported port on your ZyWALL, an ICMP response packet is
automatically returned. This allows the outside user to know the ZyWALL exists. The ZyWALL series
support anti-probing, which prevents the ICMP response packet from being sent. This keeps outsiders from
discovering your ZyWALL when unsupported ports are probed.
The following table describes the fields in this screen.
LABEL
ICMP
17-28
Figure 17-24 Security
Internet Control Message Protocol is a message control and error-reporting protocol
between a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP)
datagrams, but the messages are processed by the TCP/IP software and directly
apparent to the application user.
Table 17-8 Security
DESCRIPTION
Remote Management Screens