Table of Contents
Advertisement
The following table describes the fields in this menu.
FIELD
Dial-Backup:
Active
Use this field to turn the dial-backup feature on (Yes) or off (No).
Phone
Enter the telephone number assigned to your line by your telephone
Number
company. This field only accepts digits; do not include dashes and
spaces.
Port Speed
Press [SPACE BAR] and then press [ENTER] to select the speed of
the connection between the Dial Backup port and the external device.
Available speeds are:
9600, 19200, 38400, 57600, 115200 or 230400 bps.
AT Command
String:
Init
Enter the AT command string to initialize the WAN device. Consult the
manual of your WAN device connected to your Dial Backup port for
specific AT commands.
Edit
To edit the advanced setup for the Dial Backup port, move the cursor
Advanced
to this field; press the [SPACE BAR] to select Yes and then press
Setup
[ENTER] to go to Menu 2.1: Advanced Setup.
When you have completed this menu, press [ENTER] at the prompt "Press ENTER to Confirm..." to save
your configuration, or press [ESC] at any time to cancel.
23.4 Advanced WAN Setup
Consult the manual of your WAN device connected to your Dial Backup port for
To edit the advanced setup for the Dial Backup port, move the cursor to the Edit Advanced Setup field in
Menu 2 - WAN Setup, press the [SPACE BAR] to select Yes and then press [ENTER].
WAN and Dial Backup Setup
Table 23-2 Menu 2: Dial Backup Setup
DESCRIPTION
specific AT commands.
ZyWALL 2 Series User's Guide
EXAMPLE
1234567
at&fs0=0
No
9600
Yes
23-3
Advertisement
Table of Contents
