Configuring Wan Mac; Figure 6-6 Mac Setup - ZyXEL Communications ZYWALL2 ET 2WE User Manual

Internet security gateway
Table of Contents

Advertisement

LABEL
Windows Networking (NetBIOS over TCP/IP): Windows Networking (NetBIOS over TCP/IP): NetBIOS
(Network Basic Input/Output System) are TCP or UDP broadcast packets that enable a computer to
connect to and communicate with a LAN. For some dial-up services such as PPPoE or PPTP, NetBIOS
packets cause unwanted calls.
Allow between WAN
and LAN
Allow Trigger Dial
Apply
Reset
6.7

Configuring WAN MAC

To change your ZyWALL's WAN MAC settings, click WAN, then the WAN MAC tab. The screen appears
as shown.
WAN Screens
Table 6-7 IP Setup
Select this check box to forward NetBIOS packets from the LAN to the WAN
and from the WAN to the LAN. If your firewall is enabled with the default policy
set to block WAN to LAN traffic, you also need to enable the default WAN to
LAN firewall rule that forwards NetBIOS traffic.
Clear this check box to block all NetBIOS packets going from the LAN to the
WAN and from the WAN to the LAN.
Select this option to allow NetBIOS packets to initiate calls.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.

Figure 6-6 MAC Setup

ZyWALL 2 Series User's Guide
DESCRIPTION
6-13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zywall 2Zywall 2we

Table of Contents