Table 15-14 Directory Server Add - ZyXEL Communications ZYWALL2 ET 2WE User Manual

LABEL
Directory Service Setting
Name
Access Protocol
Server Address
Server Port
Login Setting
Login
Password
Apply
Cancel
1
At the time of writing, LDAP is the only choice of directory server access protocol.
Certificates

Table 15-14 Directory Server Add

Type up to 31 ASCII characters (spaces are not permitted) to identify this directory
server.
Use the drop-down list box to select the access protocol used by the directory server.
LDAP (Lightweight Directory Access Protocol) is a protocol over TCP that specifies
how clients access directories certificates and lists of revoked certificates.
Type the IP address (in dotted decimal notation) or the domain name of the directory
server.
This field displays the default server port number of the protocol that you select in the
Access Protocol field.
You may change the server port number if needed, however you must use the same
server port number that the directory server uses.
389 is the default server port number for LDAP.
The ZyWALL may need to authenticate itself in order to assess the directory server.
Type the login name (up to 31 ASCII characters) from the entity maintaining the
directory server (usually a certification authority).
Type the password (up to 31 ASCII characters) from the entity maintaining the
directory server (usually a certification authority).
Click Apply to save your changes back to the ZyWALL.
Click Cancel to quit configuring this screen and return to the Directory Servers
screen.
ZyWALL 2 Series User's Guide
DESCRIPTION
1
15-31