ZyWALL 2 Series User's Guide
The following table describes the fields in this screen.
LABEL
File Path
Type in the location of the file you want to upload in this field or click Browse to find it.
Browse...
Click Browse to find the .bin file you want to upload. Remember that you must decompress
compressed (.zip) files before you can upload them.
Upload
Click Upload to begin the upload process. This process may take up to two minutes.
Do not turn off the ZyWALL while firmware upload is in progress!
After you see the Firmware Upload in Process screen, wait two minutes before logging into the ZyWALL
again.
The ZyWALL automatically restarts in this time causing a temporary network disconnect. In some operating
systems, you may see the following icon on your desktop.
20-6
Figure 20-5 Firmware Upload
Figure 20-6 Firmware Upload In Process
DESCRIPTION
Maintenance