Table of Contents
Advertisement
Service Provider= WWW.DynDNS.ORG
Active= No
DDNSType= DynamicDNS
Host1=
Host2=
Host3=
USER=
Password= ********
Enable Wildcard= No
Offline= N/A
Edit Update IP Address:
Use Server Detected IP= No
User Specified IP Address= No
IP Address= N/A
Follow the instructions in the next table to configure Dynamic DNS parameters.
FIELD
Service Provider
This is the name of your Dynamic DNS service provider.
Active
Press [SPACE BAR] to select Yes and then press [ENTER] to
make dynamic DNS active.
DDNS Type
Press [SPACE BAR] and then [ENTER] to select DynamicDNS
if you have a dynamic IP address(es). Select StaticDNS if you
have a static IP address(s).
Select CustomDNS to have dyns.org provide DNS service for a
domain name that you already have from a source other than
dyndns.org.
Host1-3
Enter your host name(s) in the fields provided. You can specify
up to two host names separated by a comma in each field.
USER
Enter your user name.
Password
Enter the password assigned to you.
Enable Wildcard
Your ZyWALL supports DYNDNS Wildcard. Press [SPACE BAR]
and then [ENTER] to select Yes or No This field is N/A when
you choose DDNS client as your service provider.
SMT Menu 1 – General Setup
Menu 1.1 - Configure Dynamic DNS
Press ENTER to Confirm or ESC to Cancel:
Figure 22-2 Configure Dynamic DNS
Table 22-2 Configure Dynamic DNS
DESCRIPTION
ZyWALL 2 Series User's Guide
EXAMPLE
WWW.DynDNS.ORG
(default)
Yes
DynamicDNS
(default)
me.dyndns.org
No
22-3
Advertisement
Table of Contents
