Configuring Security Settings Of Multiple Ssids - ZyXEL Communications LTE3301 Series User Manual

For example, you may set up three wireless networks (A, B and C) in your office. A is for workers,
B is for guests and C is specific to a VoIP device in the meeting room.

4.4.1 Configuring Security Settings of Multiple SSIDs

The LTE3301 is in router mode by default.
This example shows you how to configure the SSIDs with the following parameters on your
LTE3301 .
SSID
SSID_Worker
SSID_VoIP
SSID_Guest
Connect your computer to the LAN port of the LTE3301 using an Ethernet cable.
1
The default IP address of the LTE3301is "192.168.1.1". In this case, your computer must have an IP
2
address in the range between "192.168.1.2" and "192.168.1.254".
Click Start > Run on your computer in Windows. Type "cmd" in the dialog box. Enter "ipconfig" to
3
show your computer's IP address. If your computer's IP address is not in the correct range then see
Appendix B on page 148
After you've set your computer's IP address, open a web browser such as Internet Explorer and
4
type "http://192.168.1.1" as the web address in your web browser.
Enter "admin" as the user name and "1234" (default) as the password and click Login.
5
Type a new password and retype it to confirm, then click Apply. Otherwise, click Ignore.
6
Chapter 4 Tutorials
A
SSID_Worker
B
SSID_Guest
SECURITY TYPE KEY
WPA2-PSK DoNotStealMyWirelessNetwork
WPA Compatible
WPA-PSK VoIPOnly12345678
WPA-PSK keyexample123
for information on changing your computer's IP address.
LTE3301 Series User's Guide
C
SSID_VoIP
37