Table of Contents
Advertisement
ZyWALL 2 Series User's Guide
Figure 26-6 Menu 11.5: Remote Node Filter (PPPoE or PPTP Encapsulation)
26.5 Traffic Redirect
To configure the parameters for traffic redirect, enter 11 from the main menu to display Menu 11.1—
Remote Node Profile as shown next.
Rem Node Name= ChangeMe
Active= Yes
Encapsulation= Ethernet
Service Type= Standard
Service Name= N/A
Outgoing:
To configure traffic redirect properties, press [SPACE BAR] to select Yes in the Edit Traffic Redirect
field and then press [ENTER].
26-10
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Menu 11.1 - Remote Node Profile
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Server= N/A
Relogin Every (min)= N/A
Press ENTER to Confirm or ESC to Cancel:
Figure 26-7 Menu 11.1: Remote Node Profile
Route= IP
Edit IP= No
Session Options:
Edit Filter Sets= No
Edit Traffic Redirect= Yes
Remote Node Setup
Advertisement
Table of Contents
