Table of Contents
Advertisement
ZyWALL 2 Series User's Guide
Table 11-1 Firewall Rules Summary: First Screen
LABEL
Log
Alert
Insert
Move
Edit
Delete
Apply
Reset
11.6.1 Configuring Firewall Rules
Follow these directions to create a new rule.
Step 1.
In the Summary screen, type the index number for where you want to put the rule. For example,
if you type "6", your new rule becomes number 6 and the previous rule 6 (if there is one) becomes
rule 7.
Step 2.
Click Insert to display this screen and refer to the following table for information on the fields.
11-8
This field shows you if a log is created for packets that match the rule (Match), don't
match the rule (Not Match), both (Both) or no log is created (None).
This field tells you whether this rule generates an alert (Yes) or not (No) when the
rule is matched.
Type the index number for where you want to put a rule. For example, if you type "6",
your new rule becomes number 6 and the previous rule 6 (if there is one) becomes
rule 7.
Click Insert to display this screen and refer to the following table for information on
the fields.
Select a rule's Index option button and type a number for where you want to put that
rule. Click Move to move the rule to the number that you typed. The ordering of your
rules is important as they are applied in order of their numbering.
Click Edit to create or edit a rule.
Click Delete to delete an existing firewall rule. Note that subsequent firewall rules
move up by one when you take this action.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Firewall Screens
Advertisement
Table of Contents
