Pre-Defined Ntp Time Servers List; Figure 4-3 Password; Table 4-3 Password - ZyXEL Communications ZYWALL2 ET 2WE User Manual

ZyWALL 2 Series User's Guide
The following table describes the fields in this screen.
LABEL
Old Password
New Password
Retype to Confirm
Apply
Reset
4.6

Pre-defined NTP Time Servers List

The ZyWALL uses the following pre-defined list of NTP time servers if you do not specify a time server or it
cannot synchronize with the time server you specified.
The ZyWALL can use this pre-defined list of time servers regardless of the Time
When the ZyWALL uses the pre-defined list of NTP time servers, it randomly selects one server and tries to
synchronize with it. If the synchronization fails, then the ZyWALL goes through the rest of the list in order
from the first one tried until either it is successful or all the pre-defined NTP time servers have been tried.
4-6

Figure 4-3 Password

Table 4-3 Password

Type the default password or the existing password you use to access the system
in this field.
Type the new password in this field.
Type the new password again in this field.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
Protocol you select.
DESCRIPTION
System