Configuring Security Settings Of Multiple Ssids - ZyXEL Communications EMG6765-Q10A User Manual

Clients can associate only with the SSIDs for which they have the correct security settings. Clients using
different SSIDs can access the Internet and the wired network behind the EMG6765-Q10A (such as a
printer).
For example, you may set up three wireless networks (A, B and C) in your office. A is for workers, B is for
guests and C is specific to a VoIP device in the meeting room.

6.8.1 Configuring Security Settings of Multiple SSIDs

The EMG6765-Q10A is in router mode by default.
This example shows you how to configure the SSIDs with the following parameters on your EMG6765-
Q10A (in router mode).
SSID
SSID_Worker
SSID_VoIP
SSID_Guest
Connect your computer to the LAN port of the EMG6765-Q10A using an Ethernet cable.
1
The default IP address of the EMG6765-Q10A in router mode is "192.168.1.1". In this case, your computer
2
must have an IP address in the range between "192.168.1.2" and "192.168.1.254".
Click Start > Run on your computer in Windows. Type "cmd" in the dialog box. Enter "ipconfig" to show
3
your computer's IP address. If your computer's IP address is not in the correct range then see
B on page 200
After you've set your computer's IP address, open a web browser such as Internet Explorer and type
4
"http://192.168.1.1" as the web address in your web browser.
Chapter 6 Tutorials
SECURITY TYPE
WPA2-PSK
WPA Compatible
WPA2-PSK
WPA2-PSK
for information on changing your computer's IP address.
EMG6765-Q10A User's Guide
KEY
DoNotStealMyWirelessNetwork
VoIPOnly12345678
keyexample123
49
MAC FILTERING
Disable
Allow
00:A0:C5:01:23:45
Disable
Appendix