Table 19-6 Lan Ip Address Report; Table 19-7 Report Specifications - ZyXEL Communications ZYWALL2 ET 2WE User Manual

The following table describes the labels in this screen.
LABEL
IP Address This column lists the LAN IP addresses to and/or from which the most traffic has been
sent. The LAN IP addresses are listed in descending order with the LAN IP address to
and/or from which the most traffic was sent listed first.
Direction This field displays Incoming to denote traffic that is coming in from the WAN to the
LAN. This field displays Outgoing to denote traffic that is going out from the LAN to
the WAN.
Amount This column displays how much traffic has gone to and from the listed LAN IP
addresses. The measurement unit shown (bytes, Kbytes, Mbytes or Gbytes) varies
with the amount of traffic sent to and from the LAN IP address. The count starts over
at 0 if the total traffic sent to and from a LAN IP passes the bytes count limit (see

Table 19-7 Report Specifications).

19.3.4 Reports Specifications
The following table lists detailed specifications on the reports feature.
LABEL
Number of web
sites/protocols or ports/IP
addresses listed:
Hit count limit:
Bytes count limit:
Log Screens

Table 19-6 LAN IP Address Report

Table 19-7 Report Specifications
20
32
Up to 2 hits can be counted per web site. The count starts over at 0 if it
passes four billion.
64
Up to 2 bytes can be counted per protocol/port or LAN IP address. The
count starts over at 0 if it passes 2
ZyWALL 2 Series User's Guide
DESCRIPTION
DESCRIPTION
64
bytes.
19-11