Table of Contents
Advertisement
Introducing the Web Configurator
This chapter describes how to access the ZyWALL web configurator and provides an overview of
2.1
Web Configurator Overview
The embedded web configurator (ewc) allows you to manage the ZyWALL from anywhere through a
browser such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 6.0 and later or
Netscape Navigator 7.0 and later versions with JavaScript enabled. It is recommended that you set your
screen resolution to 1024 by 768 pixels.
2.2
Accessing the ZyWALL Web Configurator
Step 1.
Make sure your ZyWALL hardware is properly connected and prepare your
computer/computer network to connect to the ZyWALL (refer to the Quick Start Guide).
Step 2.
Launch your web browser.
Step 3.
Type "192.168.1.1" as the URL.
Step 4.
Type "1234" (default) as the password and click Login. In some versions, the default password
appears automatically - if this is the case, click Login.
Step 5.
You should see a screen asking you to change your password (highly recommended) as shown
next. Type a new password (and retype it to confirm) and click Apply or click Ignore.
Introducing the Web Configurator
Figure 2-1 Change Password Screen
ZyWALL 2 Series User's Guide
Chapter 2
its screens.
2-1
Advertisement
Table of Contents
