Table of Contents
Advertisement
ZyWALL 2 Series User's Guide
21.2.2 Entering the Password
The login screen appears after you press [ENTER], prompting you to enter the password, as shown below.
For your first login, enter the default password "1234". As you type the password, the screen displays an "X"
for each character you type.
Please note that if there is no activity for longer than five minutes after you log in, your ZyWALL will
automatically log you out and display a blank screen. If you see a blank screen, press [ENTER] to bring up
the login screen again.
21.3 Navigating the SMT Interface
The SMT is an interface that you use to configure your ZyWALL.
Several operations that you should be familiar with before you attempt to modify the configuration are listed
in the table below.
OPERATION
KEYSTROKES
Move down to
[ENTER]
another menu
Move up to a
[ESC]
previous menu
Move to a
Press [SPACE BAR]
"hidden" menu
to change No to Yes
then press [ENTER].
Move the cursor [ENTER] or
[UP]/[DOWN] arrow
keys
21-2
Enter Password : XXXX
Figure 21-2 Password Screen
Table 21-1 Main Menu Commands
To move forward to a submenu, type in the number of the desired
submenu and press [ENTER].
Press the [ESC] key to move back to the previous menu.
Fields beginning with "Edit" lead to hidden menus and have a default
setting of No. Press [SPACE BAR] to change No to Yes, and then
press [ENTER] to go to a "hidden" menu.
Within a menu, press [ENTER] to move to the next field. You can also
use the [UP]/[DOWN] arrow keys to move to the previous and the
next field, respectively.
DESCRIPTION
Introducing the SMT
Advertisement
Table of Contents
