Backup Configuration; Table 33-1 Filename Conventions - ZyXEL Communications ZYWALL2 ET 2WE User Manual

ZyWALL 2 User's Guide
ftp> get rom-0 config.cfg
This is a sample FTP session saving the current configuration to the computer file "config.cfg".
If your (T)FTP client does not allow you to have a destination filename different than the source, you will
need to rename them as the ZyWALL only recognizes "rom-0" and "ras". Be sure you keep unaltered
copies of both files for later use.
The following table is a summary. Please note that the internal filename refers to the filename on the
ZyWALL and the external filename refers to the filename not on the ZyWALL, that is, on your computer,
local network or FTP site and so the name (but not the extension) may vary. After uploading new firmware,
see the RAS F/W Version field in Menu 24.2.1 - System Maintenance - Information to confirm that you
have uploaded the correct firmware version. The AT command is the command you enter after you press
"y" when prompted in the SMT menu to go into debug mode.
FILE TYPE INTERNAL
NAME
Configuration Rom-0
File
Firmware Ras

33.3 Backup Configuration

The ZyWALL displays different messages explaining different ways to backup,
restore and upload files in menus 24.5, 24.6, 24. 7.1 and 24.7.2 depending on
Option 5 from Menu 24 - System Maintenance allows you to backup the current ZyWALL configuration
to your computer. Backup is highly recommended once your ZyWALL is functioning properly. FTP is the
33-2

Table 33-1 Filename Conventions

This is the configuration filename on the ZyWALL.
Uploading the rom-0 file replaces the entire ROM file
system, including your ZyWALLconfigurations,
system-related data (including the default password),
the error log and the trace log.
This is the generic name for the Nortel Networks
firmware on the ZyWALL.
whether you use the console port or Telnet.
EXTERNAL NAME
Firmware and Configuration File Maintenance
DESCRIPTION
*.rom
*.bin