Table of Contents
Advertisement
ZyWALL 2 Series User's Guide
LABEL
Remote IP Subnet
Mask
Gateway/Remote IP
Address
System DNS Servers (if applicable)
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address and vice
versa. The DNS server is extremely important because without it, you must know the IP address of a
machine before you can access it. The ZyWALL uses a system DNS server (in the order you specify here)
to resolve domain names for VPN, DDNS and the time server.
First DNS Server
Second DNS Server
Third DNS Server
WAN MAC Address
Factory Default
Spoof this Computer's
MAC address - IP
Address
Back
Finish
3.5
Basic Setup Complete
Well done! You have successfully set up your ZyWALL to operate on your network and access the Internet.
3-12
Table 3-6 Wizard 3
Enter the gateway IP subnet mask (if your ISP gave you one) in this field if you
selected Use Fixed IP Address. This field is only available when you select
PPTP encapsulation in the previous wizard screen.
Enter the gateway IP address in this field if you selected Use Fixed IP
Address. This field is not available when you select PPPoE encapsulation in
the previous wizard screen.
Select From ISP if your ISP dynamically assigns DNS server information (and
the ZyWALL's WAN IP address). The field to the right displays the (read-only)
DNS server IP address that the ISP assigns.
Select User-Defined if you have the IP address of a DNS server. Enter the
DNS server's IP address in the field to the right.
Select None if you do not want to configure DNS servers. If you do not
configure a system DNS server, you must use IP addresses when configuring
VPN, DDNS and the time server.
The MAC address field allows you to configure the WAN port's MAC Address by
either using the factory default or cloning the MAC address from a computer on
your LAN.
Select this option to use the factory assigned default MAC Address.
Select this option and enter the IP address of the computer on the LAN whose
MAC you are cloning. Once it is successfully configured, the address will be
copied to the rom file (ZyNOS configuration file). It will not change unless you
change the setting or upload a different rom file. It is advisable to clone the
MAC address from a computer on your LAN even if your ISP does not presently
require MAC address authentication.
Click Back to return to the previous screen.
Click Finish to complete and save the wizard setup.
DESCRIPTION
Wizard Setup
Advertisement
Table of Contents
