Figure 116 Network > Wlan > Port Roles; Table 56 Network > Wlan > Port Roles - ZyXEL Communications ZYWALL 35 User Manual

Chapter 10 WLAN
Do the following if you are configuring from a computer connected to a LAN,
DMZ or WLAN port and changing the port's role:
1 A port's IP address varies as its role changes, make sure your computer's IP address is in
the same subnet as the ZyWALL's LAN, DMZ or WLAN IP address.
2 Use the appropriate LAN, DMZ or WLAN IP address to access the ZyWALL.
To change your ZyWALL's port role settings, click NETWORK > WLAN > Port Roles. The
screen appears as shown.
The radio buttons correspond to Ethernet ports on the front panel of the ZyWALL. On the
ZyWALL 70, ports 1 to 4 are all DMZ ports by default. On the ZyWALL 5 or ZyWALL 35,
ports 1 to 4 are all LAN ports by default.
Your changes are also reflected in the LAN and/or DMZ Port Roles screen.
Figure 116 NETWORK > WLAN > Port Roles
The following table describes the labels in this screen.
Table 56 NETWORK > WLAN > Port Roles
LABEL
LAN
DMZ
WLAN
Apply
Reset
After you change the LAN/DMZ/WLAN port roles and click Apply, please wait for few
seconds until the following screen appears. Click Return to go back to the Port Roles screen.
220
DESCRIPTION
Select a port's LAN radio button to use the port as part of the LAN. The port will
use the LAN IP address.
Select a port's DMZ radio button to use the port as part of the DMZ. The port will
use the DMZ IP address.
Select a port's WLAN radio button to use the port as part of the WLAN.
The port will use the WLAN IP address.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 5/35/70 Series User's Guide