ZyXEL Communications ZYWALL 35 User Manual page 566

Chapter 31 Logs Screens
Table 189 PKI Logs (continued)
LOG MESSAGE
Rcvd user cert:
<subject name>
Rcvd CRL <size>:
<issuer name>
Rcvd ARL <size>:
<issuer name>
Failed to decode the
received ca cert
Failed to decode the
received user cert
Failed to decode the
received CRL
Failed to decode the
received ARL
Rcvd data <size> too
large! Max size
allowed: <max size>
Cert trusted: <subject
name>
Due to <reason codes>,
cert not trusted:
<subject name>
CODE
1
2
3
4
5
6
7
8
9
10
11
12
566
DESCRIPTION
The router received a user certificate, with subject name as recorded,
from the LDAP server whose IP address and port are recorded in the
Source field.
The router received a CRL (Certificate Revocation List), with size and
issuer name as recorded, from the LDAP server whose IP address and
port are recorded in the Source field.
The router received an ARL (Authority Revocation List), with size and
issuer name as recorded, from the LDAP server whose address and
port are recorded in the Source field.
The router received a corrupted certification authority certificate from
the LDAP server whose address and port are recorded in the Source
field.
The router received a corrupted user certificate from the LDAP server
whose address and port are recorded in the Source field.
The router received a corrupted CRL (Certificate Revocation List) from
the LDAP server whose address and port are recorded in the Source
field.
The router received a corrupted ARL (Authority Revocation List) from
the LDAP server whose address and port are recorded in the Source
field.
The router received directory data that was too large (the size is listed)
from the LDAP server whose address and port are recorded in the
Source field. The maximum size of directory data that the router allows
is also recorded.
The router has verified the path of the certificate with the listed subject
name.
Due to the reasons listed, the certificate with the listed subject name
has not passed the path verification. The recorded reason codes are
only approximate reasons for not trusting the certificate. Please see
Table 200 on page 566
codes.
DESCRIPTION
Algorithm mismatch between the certificate and the search constraints.
Key usage mismatch between the certificate and the search constraints.
Certificate was not valid in the time interval.
(Not used)
Certificate is not valid.
Certificate signature was not verified correctly.
Certificate was revoked by a CRL.
Certificate was not added to the cache.
Certificate decoding failed.
Certificate was not found (anywhere).
Certificate chain looped (did not find trusted root).
Certificate contains critical extension that was not handled.
for the corresponding descriptions of the
ZyWALL 5/35/70 Series User's Guide