Table 62 WIRELESS > Wi-Fi > Wireless Card: 802.1x + Dynamic WEP
LABEL
Authentication
Databases
Dynamic WEP
Key Exchange
Apply
Reset
10.16.5 IEEE 802.1x + Static WEP
Click WIRELESS > Wi-Fi > Wireless Card to display the Wireless Card screen. Select
802.1x + Static WEP from the Security list.
Figure 127 WIRELESS > Wi-Fi > Wireless Card: 802.1x + Static WEP
The following wireless LAN security fields become available when you select 802.1x + Static
WEP in the Security drop down list-box.
Table 63 WIRELESS > Wi-Fi > Wireless Card: 802.1x + Static WEP
LABEL
Security
WEP Encryption
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
Click RADIUS to go to the RADIUS screen where you can configure the ZyWALL
to check an external RADIUS server.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
DESCRIPTION
Select 802.1x + Static WEP from the drop-down list.
WEP (Wired Equivalent Privacy) provides data encryption to prevent unauthorized
wireless stations from accessing data transmitted over the wireless network.
Select 64-bit WEP or 128-bit WEP to enable data encryption.
Chapter 10 WLAN
235