ZyXEL Communications ZYWALL 35 User Manual page 67

Table 4 Web Configurator HOME Screen in Router Mode (continued)
LABEL
Status
IP/Netmask
IP Assignment
Renew
Security Services
Turbo Card
IDP/Anti-Virus
Definitions
IDP/Anti-Virus
Expiration Date
Anti-Spam
Expiration Date
Content Filter
Expiration Date
Intrusion Detected
ZyWALL 5/35/70 Series User's Guide
DESCRIPTION
For the LAN, DMZ and WLAN ports, this displays the port speed and duplex
setting. Ethernet port connections can be in half-duplex or full-duplex mode. Full-
duplex refers to a device's ability to send and receive simultaneously, while half-
duplex indicates that traffic can flow in only one direction at a time. The Ethernet
port must use the same speed or duplex mode setting as the peer Ethernet port in
order to connect.
For the WAN interface(s) and the Dial Backup port, it displays the port speed and
duplex setting if you're using Ethernet encapsulation or the remote node name
(configured through the SMT) for a PPP connection and Down (line is down or
not connected), Idle (line (ppp) idle), Dial (starting to trigger a call) or Drop
(dropping a call) if you're using PPPoE encapsulation.
This shows the port's IP address and subnet mask.
For the WAN, if the ZyWALL gets its IP address automatically from an ISP, this
displays DHCP client when you're using Ethernet encapsulation and IPCP Client
when you're using PPPoE or PPTP encapsulation. Static displays if the WAN
port is using a manually entered static (fixed) IP address.
For the LAN, WLAN or DMZ, DHCP server displays when the ZyWALL is set to
automatically give IP address information to the computers connected to the LAN.
DHCP relay displays when the ZyWALL is set to forward IP address assignment
requests to another DHCP server. Static displays if the LAN port is using a
manually entered static (fixed) IP address. In this case, you must have another
DHCP server on your LAN, or else the computers must be manually configured.
For the dial backup port, this shows N/A when dial backup is disabled and IPCP
client when dial backup is enabled.
If you are using Ethernet encapsulation and the WAN port is configured to get the
IP address automatically from the ISP, click Renew to release the WAN port's
dynamically assigned IP address and get the IP address afresh. Click Dial to dial
up the PPTP, PPPoE or dial backup connection. Click Drop to disconnect the
PPTP, PPPoE, 3G WAN or dial backup connection.
This field displays whether or not a ZyWALL Turbo Card is installed.
Note: The ZyWALL must have a Turbo Card installed and a valid
service subscription to use the IDP and anti-virus features.
This is the version number of the signatures set that the ZyWALL is using and the
date and time that the set was released. Click the field label to go to the screen
where you can update the signatures. N/A displays when there is no Turbo Card
installed or the service subscription has expired.
This is the date the IDP/anti-virus service subscription expires. Click the field label
to go to the screen where you can update your service subscription.
This is the date the anti-spam service subscription expires. Click the field label to
go to the screen where you can update your service subscription.
This is the date the category-based content filtering service subscription expires.
Click the field label to go to the screen where you can update your service
subscription.
This displays how many intrusions the ZyWALL has detected since it last started
up. N/A displays when the ZyWALL has never had an IDP subscription or there is
no Turbo Card installed. Disable displays when IDP threat statistics collection is
disabled.
Click the field label to go to the related screen.
Chapter 2 Introducing the Web Configurator
67