Time And Date Setting; Figure 480 Menu 24: System Maintenance - ZyXEL Communications ZYWALL 35 User Manual

Chapter 49 System Maintenance Menus 8 to 10
Table 260 Call History
FIELD
Rate
#call
Max
Min
Total
You may enter an entry number to delete it or '"0" to exit.

49.3 Time and Date Setting

The ZyWALL's Real Time Chip (RTC) keeps track of the time and date. There is also a
software mechanism to set the time manually or get the current time and date from an external
server when you turn on your ZyWALL. Menu 24.10 allows you to update the time and date
settings of your ZyWALL. The real time is then displayed in the ZyWALL error logs and
firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.

Figure 480 Menu 24: System Maintenance

Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the
time and date settings of your ZyWALL as shown in the following screen.
732
DESCRIPTION
This is the transfer rate of the call.
This is the number of calls made to or received from that telephone number.
This is the length of time of the longest telephone call.
This is the length of time of the shortest telephone call.
This is the total length of time of all the telephone calls to/from that telephone
number.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number:
ZyWALL 5/35/70 Series User's Guide