Table 45 Network > Wan > 3G (Wan 2) - ZyXEL Communications ZYWALL 35 User Manual

Chapter 8 WAN Screens
The following table describes the labels in this screen.
Table 45 NETWORK > WAN > 3G (WAN 2)
LABEL
Enable
3G Card
Configuration
3G Wireless Card
Network Type
Network
Selection
ISP Parameters
for Internet
Access
Access Point
Name (APN)
Initial String
(containing APN)
Authentication
Type
User Name
Password
Retype to
Confirm
192
DESCRIPTION
Select this option to enable WAN 2.
The fields below display only when you enable WAN 2.
This displays the manufacturer and model name of your 3G card if you inserted
one in the ZyWALL. Otherwise, it displays Not Installed.
Select the type of the network (UMTS/HSDPA only, GPRS/EDGE only, GSM all
or WCDMA all) to which you want the card to connect. See
for more information. Otherwise, select Automatically to have the card connect to
an available network using the default settings on the 3G card.
The types of the network vary depending on the 3G card you inserted.
This setting is saved to the flash of your 3G card.
Select a service provider to which you want the card to connect. Otherwise, select
Automatically to have the ZyWALL use the default settings on the 3G card and
connect to your service provider's base station.
This shows Automatically only by default. Click Scan to have the ZyWALL search
for and display the available service providers.
This field resets to the default setting (Automatically) if the ZyWALL restarts.
This field displays with a GSM or HSDPA 3G card. Enter the APN (Access Point
Name) provided by your service provider. Connections with different APNs may
provide different services (such as Internet access or MMS (Multi-Media
Messaging Service)) and charge method.
You can enter up to 31 ASCII printable characters. Spaces are allowed.
Select this option and enter the initial string and APN if you know how to configure
it or your ISP provides a string, which would include the APN, to initialize the 3G
card.
You can enter up to 72 ASCII printable characters. Spaces are allowed.
This field is available only when you insert a GSM 3G card.
The ZyWALL supports PAP (Password Authentication Protocol) and CHAP
(Challenge Handshake Authentication Protocol). CHAP is more secure than PAP;
however, PAP is readily available on more platforms.
Use the drop-down list box to select an authentication protocol for outgoing calls.
Options are:
CHAP/PAP - Your ZyWALL accepts either CHAP or PAP when requested by this
remote node.
CHAP - Your ZyWALL accepts CHAP only.
PAP - Your ZyWALL accepts PAP only.
Type the user name (of up to 31 ASCII printable characters) given to you by your
service provider.
Type the password (of up to 31 ASCII printable characters) associated with the
user name above.
Type your password again to make sure that you have entered is correctly.
Table 44 on page 190
ZyWALL 5/35/70 Series User's Guide