Chapter 40 Wireless Setup
The following table describes the fields in this menu.
Table 234 Menu 7.1.1: WLAN MAC Address Filter
FIELD
Active
Filter Action
MAC Address
Filter
Address 1..12
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm...] to
save your configuration, or press [ESC] at any time to cancel.
40.2 TCP/IP Setup
For more detailed information about RIP setup, IP Multicast and IP alias, please refer to
Chapter 6 on page
40.2.1 IP Address
From the main menu, enter 7 to open Menu 7 - WLAN Setup to configure TCP/IP (RFC
1155).
Figure 392 Menu 7: WLAN Setup
From menu 7, select the submenu option 2. TCP/IP and DHCP Setup and press [ENTER].
The screen now displays Menu 7.2 -
646
DESCRIPTION
To enable MAC address filtering, press [SPACE BAR] to select Yes and press
[ENTER].
Define the filter action for the list of MAC addresses in the MAC address filter table.
To deny access to the ZyWALL, press [SPACE BAR] to select Deny Association
and press [ENTER]. MAC addresses not listed will be allowed to access the router.
The default action, Allowed Association, permits association with the ZyWALL.
MAC addresses not listed will be denied access to the router.
Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers
that are allowed or denied access to the ZyWALL in these address fields.
149.
Menu 7 - WLAN Setup
1. Wireless Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
TCP/IP and DHCP Ethernet Setup,
as shown next.
ZyWALL 5/35/70 Series User's Guide