ZyXEL Communications ZYWALL 35 User Manual page 288

Chapter 13 Configuring IDP
Table 82 SECURITY > IDP > Signature: Query View (continued)
LABEL
Alert
Action
Apply
Reset
13.3.5.1 Query Example 1
1 From the "group view" signature screen, click the Switch to query view link.
1 Select Signature Search.
2 Select By Name or By ID from the list box.
3 Enter a name (complete or partial) or complete ID to display all relevant signatures in the
signature database.
A partial name may be searched but a complete ID number must be entered
before a match can be found. For example, a search by name for "w" (in the
first example) finds all intrusions that contain this letter in the name field.
However a search by ID for "1" would return no match. You must enter the
complete ID as shown in the second example.
4 Click Search. If the search finds more signatures than can be displayed on one page, use
the Go to Page list box to view other pages of signatures found in the search.
5 If you change the Active, Log, Alert and/or Action signature fields in the signatures
found, then click Apply to save the changes to the ZyWALL.
288
DESCRIPTION
You can only edit the Alert check box when the corresponding Log check box is
selected.
Select this check box to have an e-mail sent when a match is found for a
signature.
Select the check box in the heading row to automatically select all check boxes or
clear it to clear all entries on the current page.
Alternatively, you may select or clear individual entries. The check box becomes
gray when you select the check box.
If you edited any of the check boxes in this column on the current page, use the
check box in the heading row to switch between the settings (last partial edited, all
selected and all cleared).
You can change the default signature action here. See
more details on actions.
Click this button to save your changes back to the ZyWALL.
Click this button to begin configuring this screen afresh.
Table 80 on page 284
ZyWALL 5/35/70 Series User's Guide
for