Configuration File Upload; Figure 469 Telnet Into Menu 24.7.1: Upload System Firmware; Figure 470 Telnet Into Menu 24.7.2: System Maintenance - ZyXEL Communications ZYWALL 35 User Manual

Chapter 48 Firmware and Configuration File Maintenance

Figure 469 Telnet Into Menu 24.7.1: Upload System Firmware

Menu 24.7.1 - System Maintenance - Upload System Firmware
To upload the system firmware, follow the procedure below:
and SMT password as requested.
name of your firmware upgrade file on your workstation and "ras" is the
remote file name on the system.
upload.
For details on FTP commands, please consult the documentation of your
FTP client program. For details on uploading system firmware using TFTP
(note that you must remain on this menu to upload system firmware using
TFTP), please see your manual.
Press ENTER to Exit:

48.5.2 Configuration File Upload

You see the following screen when you telnet into menu 24.7.2.

Figure 470 Telnet Into Menu 24.7.2: System Maintenance

Menu 24.7.2 - System Maintenance - Upload System Configuration File
To upload the system configuration file, follow the procedure below:
and SMT password as requested.
"configurationfilename" is the name of your system configuration file on
your workstation, which will be transferred to the "rom-0" file on the
system.
configuration file process is complete.
For details on FTP commands, please consult the documentation of your
FTP client program. For details on uploading configuration file using
TFTP (note that you must remain on this menu to upload configuration
file using TFTP), please see your manual.
Press ENTER to Exit:
To upload the firmware and the configuration file, follow these examples
724
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system.
3. Type "put firmwarefilename ras" where "firmwarefilename" is the
4. The system reboots automatically after a successful firmware
1. Launch the FTP client on your workstation.
2. Type "open" and the IP address of your system. Then type "admin"
3. Type "put configurationfilename rom-0" where
4. The system reboots automatically after the upload system
Then type "admin"
ZyWALL 5/35/70 Series User's Guide