C
H A P T E R
This chapter shows you how to configure your ZyWALL for Internet access.
37.1 Introduction to Internet Access Setup
Use information from your ISP along with the instructions in this chapter to set up your
ZyWALL to access the Internet. There are three different menu 4 screens depending on
whether you chose Ethernet, PPTP or PPPoE Encapsulation. Contact your ISP to
determine what encapsulation type you should use.
This menu configures WAN 1 on a ZyWALL with multiple WAN ports.
Configure the WAN 2 port in Menu 11.2 - Remote Node Profile or in the WAN
> WAN 2 screen via the web configurator.
37.2 Ethernet Encapsulation
If you choose Ethernet in menu 4 you will see the next menu.
ZyWALL 5/35/70 Series User's Guide
Internet Access
37
629