3 Select Zero Configuration Mode.
4 Click Apply. The system reboots automatically and restarts in zero configuration mode.
4.1.4 Testing Your VPN Configuration
Test the VPN configuration before giving the ZyWALL P1 to Bob.
1 ZyWALL A should already be connected to the Internet using it's public WAN IP
address. Connect ZyWALL B to the Internet. Make sure it gets a public WAN IP. You
may have to take ZyWALL B to another location if it cannot get a public IP address at
the company.
2 Configure one computer to use IP address 192.168.167.2/24 behind ZyWALL B. Use
"ipconfig" in the command mode to ensure the IP address is properly configured.
Figure 46 Check The Telecommuter's Computer IP Address
C:\>ipconfig
Windows 2000 IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix
IP Address. . . . . . . . . . . . : 192.168.167.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.167.1
ZyWALL 5/35/70 Series User's Guide
. :
Chapter 4 Tutorials
117