Figure 145 Security > Firewall > Rule Summary; Table 71 Security > Firewall > Rule Summary - ZyXEL Communications ZYWALL 35 User Manual

Chapter 11 Firewall
The ordering of your rules is very important as rules are applied in the order
that they are listed.
See Section 11.1 on page 243
Figure 145 SECURITY > FIREWALL > Rule Summary
The following table describes the labels in this screen.
Table 71 SECURITY > FIREWALL > Rule Summary
LABEL
Packet Direction Use the drop-down list boxes and click Refresh to select a direction of travel of
+/-
Default Policy
The following fields summarize the rules you have created that apply to traffic traveling in the selected
packet direction. The firewall rules that you configure (summarized below) take priority over the
general firewall action settings above.
#
Name
Active
Source Address
260
for more information about the firewall.
DESCRIPTION
packets for which you want to display firewall rules.
Note: The VPN connection directions apply to the traffic going to or
from the ZyWALL's VPN tunnels. They do not apply to other
VPN traffic for which the ZyWALL is not one of the gateways
(VPN pass-through traffic).
In the heading row, click + to expand or - to collapse the Source Address,
Destination Address and Service Type drop down lists for all of the displayed
rules.
This field displays the default action you selected in the Default Rule screen for the
packet direction displayed.
This is your firewall rule number. The ordering of your rules is important as rules are
applied in turn. Click + to expand or - to collapse the Source Address, Destination
Address and Service Type drop down lists.
This is the name of the firewall rule.
This field displays whether a firewall is turned on (Y) or not (N). Click the setting to
change it.
This drop-down list box displays the source addresses or ranges of addresses to
which this firewall rule applies. Please note that a blank source or destination
address is equivalent to Any.
ZyWALL 5/35/70 Series User's Guide