Figure 312 Advanced > Custom App; Table 160 Advanced > Custom App - ZyXEL Communications ZYWALL 35 User Manual

Chapter 28 Custom Application
Figure 312 ADVANCED > Custom APP
The following table describes the labels in this screen.
Table 160 ADVANCED > Custom APP
LABEL
Application
Description
Start Port
End Port
Apply
Reset
526
DESCRIPTION
Select the application for which you want the ZyWALL to monitor specific ports. You
can use the same application in more than one entry. To remove an entry, select
Select a Type.
Enter information about the reason for monitoring custom port numbers for this
protocol.
Enter the starting port for the range that the ZyWALL is to monitor for this
application. If you are only entering a single port number, enter it here.
Enter the ending port for the range that the ZyWALL is to monitor for this application.
Click Apply to save your changes back to the ZyWALL.
Click Reset to begin configuring this screen afresh.
ZyWALL 5/35/70 Series User's Guide