Figure 45 Network > Interface > Port Grouping, Initial; Figure 46 Network > Interface > Port Grouping, Drag-And-Drop - ZyXEL Communications ZyWALL 1050 User Manual

Chapter 6 Tutorials
Figure 45 Network > Interface > Port Grouping, Initial
2 Drag physical port 2 onto representative interface ge1, as shown below.
Figure 46 Network > Interface > Port Grouping, Drag-and-Drop
3 Click Apply.
4 Click Status, and look at the Interface Status Summary, shown below. Ethernet
interface ge1 has a status of Port Group Up, and Ethernet interface ge2 is disabled and
has a Status of Port Group Inactive.
124
ZyWALL 1050 User's Guide