To Vpn Packet Direction; Figure 134 From Lan To Vpn Example - ZyXEL Communications ZYWALL 35 User Manual

Internet security appliance
Hide thumbs Also See for ZYWALL 35:
Table of Contents

Advertisement

11.3.1 To VPN Packet Direction

The ZyWALL can apply firewall rules to traffic before encrypting it to send through a VPN
tunnel. To VPN means traffic that comes in through the selected "from" interface and goes out
through any of the ZyWALL's VPN tunnels. For example, From LAN To VPN specifies the
traffic that is coming from the LAN and going out through any of the ZyWALL's VPN
tunnels.
For example, by default the From LAN To VPN default firewall rule allows traffic from the
LAN computers to go out through any of the ZyWALL's VPN tunnels. You could configure
the From DMZ To VPN default rule to set the ZyWALL to silently block traffic from the
DMZ computers from going out through any of the ZyWALL's VPN tunnels.

Figure 134 From LAN to VPN Example

In order to do this, you would configure the SECURITY > FIREWALL > Default Rule
screen as follows.
ZyWALL 5/35/70 Series User's Guide
Chapter 11 Firewall
247

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents