Figure 204 Security > Vpn > Vpn Rules (Ike); Table 99 Security > Vpn > Vpn Rules (Ike) - ZyXEL Communications ZYWALL 35 User Manual

Chapter 18 IPSec VPN
Click SECURITY > VPN to display the VPN Rules (IKE) screen. Use this screen to manage
the ZyWALL's list of VPN rules (tunnels) that use IKE SAs.
Figure 204 SECURITY > VPN > VPN Rules (IKE)
The following table describes the labels in this screen.
Table 99 SECURITY > VPN > VPN Rules (IKE)
LABEL
+/-
VPN Rules
#
Gateway Policies
My
ZyWALL
Remote
Gateway
Network Policies
Y/N
354
DESCRIPTION
In the heading row, click + to expand or - to collapse the VPN rule network
policies.
These VPN rules define the settings for creating VPN tunnels for secure
connection to other computers or networks.
Click this icon to add a VPN gateway policy (or IPSec rule).
This is your VPN rule number. Click + to expand or - to collapse the VPN rule's
network policies.
The first row of each VPN rule represents the gateway policy.
The gateway policy identifies the IPSec routers at either end of a VPN tunnel (My
ZyWALL and Remote Gateway) and specifies the authentication, encryption and
other settings needed to negotiate a phase 1 IKE SA (click the edit icon to display
the other settings).
This represents your ZyWALL.
The WAN IP address, domain name or dynamic domain name of your ZyWALL
displays in router mode.
The ZyWALL's IP address displays in bridge mode.
This represents the remote secure gateway.
The IP address, domain name or dynamic domain name of the remote IPSec
router displays if you specify it, otherwise Dynamic displays.
Click this icon to add a VPN network policy.
The subsequent rows in a VPN rule are network policies. A network policy
identifies the devices behind the IPSec routers at either end of a VPN tunnel and
specifies the authentication, encryption and other settings needed to negotiate a
phase 2 IPSec SA.
This field displays whether the network policy is active (Y) or not (N). Click the
setting to change it.
ZyWALL 5/35/70 Series User's Guide