Ap Lists Screen - ZyXEL Communications NWA-3160 - V3.70 Manual

Table 11 Status Screen
LABEL
2.4GHz
Redundancy
Redundancy Device
Last Synchronization
Result
Last Synchronization
Time
Alive Status
System Status
AP List
AP Statistics
Association List
SSID Information

6.4 AP Lists Screen

Use this screen to view and add managed APs. By default, the controller NWA is
always included in this table. Although you cannot remove it, you can edit its
settings.
NWA-3160 Series User's Guide
DESCRIPTION
This field displays the number of wireless clients associated with
APs managed by the NWA (including the NWA itself) using
2.4GHz radio.
The table below shows when redundancy is enabled (see
6.6 on page 102) and the NWA acts as the primary AP controller.
This field displays the IP address of the secondary AP controller.
This field displays whether the last synchronization with the
secondary AP controller succeeded (SUCCESS) or failed
(DISABLED).
This field displays the last date and time when the NWA
synchronized settings with the secondary AP controller.
This field displays either NO RESPONSE (the secondary AP
controller is down) or ALIVE (the secondary AP controller is
active).
Click this to see a list of the APs managed by the NWA.
Click this to see packet statistics related to each of the APs
managed by the NWA.
Click this to see information about each of the wireless clients
connected to APs managed by the NWA. This does not include the
NWA itself.
Click this to see details of the security settings used by each
SSID, and the number of wireless clients associated with each
SSID.
Chapter 6 AP Controller Mode
Section
97