ZyXEL Communications NWA-3160 - V3.70 Manual page 205

To change your NWA's WWW settings, click REMOTE MGNT > WWW. The
following screen shows.
Figure 117 Remote Management: WWW
The following table describes the labels in this screen.
Table 57 Remote Management: WWW
LABEL
WWW
Server Port
Server Access
Secured Client
IP Address
HTTPS
Server
Certificate
Authenticate
Client
Certificates
NWA-3160 Series User's Guide
DESCRIPTION
This is set to port 80 by default.
You may change the server port number for a service if needed,
however you must use the same port number in order to use that
service for remote management.
Select the interface(s) through which a computer may access the NWA
using this service.
A secured client is a "trusted" computer that is allowed to communicate
with the NWA using this service.
Select All to allow any computer to access the NWA using this service.
Choose Selected to just allow the computer with the IP address that
you specify to access the NWA using this service.
Select the Server Certificate that the NWA will use to identify itself.
The NWA is the SSL server and must always authenticate itself to the
SSL client (the computer which requests the HTTPS connection with the
NWA).
Select Authenticate Client Certificates (optional) to require the SSL
client to authenticate itself with the NWA by sending the NWA a
certificate. To do that the SSL client must have a CA-signed certificate
from a CA that has been imported as a trusted CA on the NWA (see the
appendix on importing certificates for details).
Chapter 16 Remote Management Screens
205