Configure The Server_2 Network - ZyXEL Communications NWA-3160 - V3.70 Manual

Chapter 3 Tutorials
Enter the MAC address of the device Alice uses to connect to the network in Index
8
1's MAC Address field and enter her name in the Description field, as shown in
the following figure. Change the Profile Name to "MacFilter_SERVER_1". Select
Allow Association from the Filter Action field and click Apply.
Figure 41 Tutorial: MAC Filter Edit (SERVER_1)
You have restricted access to the SERVER_1 network to only the networking
device whose MAC address you entered. The SERVER_1 network is now
configured.

3.5.5 Configure the SERVER_2 Network

Next, you will configure the SERVER_2 network that allows Bob to access secure
server 2 and the Internet.
To do this, repeat the procedure in
following information.
Table 7 Tutorial: SERVER_2 Network Information
SSID Screen
Index
Profile Name
SSID Edit (SERVER_2) Screen
L2 Isolation
MAC Filtering
Layer-2 Isolation (L2Isolation04) Screen
Profile Name
Set 1
Set 2
Set 3
66
Section 3.5.4 on page
4
SERVER_2
L2Isolation04
macfilter04
L-2-ISO_SERVER-2
MAC Address: 77:66:55:44:33:22
Description: NET_SWITCH
MAC Address: 99:88:77:66:55:44
Description: SERVER_2
MAC Address: 66:55:44:33:22:11
Description: GATEWAY
NWA-3160 Series User's Guide
63, substituting the