ZyXEL Communications NWA-3160 - V3.70 Manual page 193

Chapter 15 Rogue AP Detection
The friendly AP list displays details of all the access points in your area that you
know are not a threat. If you have more than one AP in your network, you need to
configure this list to include your other APs. If your wireless network overlaps with
that of a neighbor (for example) you should also add these APs to the list, as they
do not compromise your own network's security. If you do not add them to the
friendly AP list, these access points will appear in the Rogue AP list each time the
NWA scans.
"Honeypot" Attack
Rogue APs need not be connected to the legitimate network to pose a severe
security threat. In the following example, an attacker (X) is stationed in a vehicle
outside a company building, using a rogue access point equipped with a powerful
antenna. By mimicking a legitimate (company network) AP, the attacker tries to
capture usernames, passwords, and other sensitive information from
unsuspecting clients (A and B) who attempt to connect. This is known as a
"honeypot" attack.
Figure 109 "Honeypot" Attack
If a rogue AP in this scenario has sufficient power and is broadcasting the correct
SSID (Service Set IDentifier) clients have no way of knowing that they are not
associating with a legitimate company AP. The attacker can forward network traffic
from associated clients to a legitimate AP, creating the impression of normal
service. This is a variety of "man-in-the-middle" attack.
193
NWA-3160 Series User's Guide