Radius Vlan Screen - ZyXEL Communications NWA-3160 - V3.70 Manual

Chapter 20 VLAN
Table 78 VLAN > Wireless VLAN
FIELD
Native VLAN
VLAN Mapping Table
Index
Name
SSID
VLAN ID
Second Rx VLAN ID
Apply
Reset

20.2.1 RADIUS VLAN Screen

Use this screen to configure your RADIUS Virtual LAN setup. Your RADIUS server
assigns VLAN IDs to a user or user group's traffic based on what you set in this
screen.
252
DESCRIPTION
Check this to assign the Management VLAN ID as a Native
VLAN. Leave this blank if you do not know the native VLAN
ID assigned by the network administrator.
A native VLAN is the default VLAN where untagged traffic
can pass through between two switches.
Note: The Native VLAN assignment must be the same
on two switches for it to work.
Use this table to have the NWA assign VLAN tags to packets
from wireless clients based on the SSID they use to
connect to the NWA.
This is the index number of the SSID profile.
This is the name of the SSID profile.
This is the SSID the profile uses.
Enter a VLAN ID number from 1 to 4094. Packets coming
from the WLAN using this SSID profile are tagged with the
VLAN ID number by the NWA. Different SSID profiles can
use the same or different VLAN IDs. This allows you to split
wireless stations into groups using similar VLAN IDs.
Enter a number from 1 to 4094, but different from the
VLAN ID. Traffic received from the LAN that is tagged with
this VLAN ID is sent to all SSIDs with this VLAN ID
configured in the VLAN ID or Second Rx VLAN ID fields.
See Section 20.3.4 on page 267
Click this to save your changes to the NWA.
Click this to return this screen to its last-saved settings.
for more information.
NWA-3160 Series User's Guide