ZyXEL Communications NWA-3160 - V3.70 Manual page 243

The following table describes the labels in this screen.
Table 73 Logs > Log Settings
LABEL
Address Info
Mail Server
Mail Subject
Send Log to
Send Alerts to
SMTP
Authentication
User Name
Password
Syslog Logging
Active
Syslog IP
Address
Log Facility
Send Log
Log Schedule
Day for Sending
Log
Time for
Sending Log
NWA-3160 Series User's Guide
DESCRIPTION
Enter the server name or the IP address of the mail server for the e-
mail addresses specified below. If this field is left blank, logs and
alert messages will not be sent via e-mail.
Type a title that you want to be in the subject line of the log e-mail
message that the NWA sends.
Logs are sent to the e-mail address specified in this field. If this field
is left blank, logs will not be sent via e-mail.
Enter the e-mail address where the alert messages will be sent. If
this field is left blank, alert messages will not be sent via e-mail.
If you use SMTP authentication, the mail receiver should be the
owner of the SMTP account.
If your e-mail account requires SMTP authentication, enter the
username here.
Enter the password associated with the above username.
Syslog logging sends a log to an external syslog server used to
store logs.
Click Active to enable syslog logging.
Enter the server name or IP address of the syslog server that will
log the selected categories of logs.
Select a location from the drop down list box. The log facility allows
you to log the messages to different files in the syslog server. Refer
to the documentation of your syslog program for more details.
This drop-down menu is used to configure the frequency of log
messages being sent as E-mail:
• Daily
• Weekly
• Hourly
• When Log is Full
• None
If the Weekly or the Daily option is selected, specify a time of day
when the E-mail should be sent. If the Weekly option is selected,
then also specify which day of the week the E-mail should be sent.
If the When Log is Full option is selected, an alert is sent when the
log fills up. If you select None, no log messages are sent.
This field is only available when you select Weekly in the Log
Schedule field.
Use the drop down list box to select which day of the week to send
the logs.
Enter the time of the day in 24-hour format (for example 23:00
equals 11:00 pm) to send the logs.
Chapter 19 Log Screens
243