Select the Security Group type parameter check box.
1c
Click OK.
1d
Figure 146 New Global Security Group
In VLAN Group ID Properties, click the Members tab.
2
Note: The IAS uses group memberships to determine which user accounts belong to
which VLAN groups. Click the Add button and configure the VLAN group
details.
Repeat the previous step to add each VLAN group required.
3
Figure 147 Add Group Members
20.3.3.2 Configuring Remote Access Policies
Once the VLAN Groups have been created, the IAS Remote Access Policy needs to
be defined. This allows the IAS to compare the user account being authenticated
against the group memberships of each VLAN Group.
NWA-3160 Series User's Guide
Chapter 20 VLAN
259