ZyXEL Communications NWA-3160 - V3.70 Manual page 342

Appendix C IP Addresses and Subnetting
• If you have a static IP address click Use the following IP Address and fill in
the IP address, Subnet mask, and Default gateway fields. Click
Advanced.
Figure 206 Windows XP: Advanced TCP/IP Settings
If you do not know your gateway's IP address, remove any previously installed
6
gateways in the IP Settings tab and click OK.
Do one or more of the following if you want to configure additional IP addresses:
• In the IP Settings tab, in IP addresses, click Add.
• In TCP/IP Address, type an IP address in IP address and a subnet mask in
Subnet mask, and then click Add.
• Repeat the above two steps for each IP address you want to add.
• Configure additional default gateways in the IP Settings tab by clicking Add
in Default gateways.
• In TCP/IP Gateway Address, type the IP address of the default gateway in
Gateway. To manually configure a default metric (the number of transmission
hops), clear the Automatic metric check box and type a metric in Metric.
• Click Add.
• Repeat the previous three steps for each default gateway you want to add.
• Click OK when finished.
In the Internet Protocol TCP/IP Properties window (the General tab in
7
Windows XP):
342
NWA-3160 Series User's Guide