The Snmp Screen - ZyXEL Communications NWA-3160 - V3.70 Manual

16.5 The SNMP Screen

Use this screen to have a manager station administrate your NWA over the
network. To change your NWA's SNMP settings, click REMOTE MGMT > SNMP.
The following screen displays.
Figure 118 Remote Management: SNMP
The following table describes the labels in this screen.
Table 58 Remote Management: SNMP
LABEL
SNMP Configuration
Get Community
Set Community
Community
Trap Destination
NWA-3160 Series User's Guide
DESCRIPTION
Enter the Get Community, which is the password for the incoming
Get and GetNext requests from the management station. The default
is public and allows all requests.
Enter the Set community, which is the password for incoming Set
requests from the management station. The default is public and
allows all requests.
Type the trap community, which is the password sent with each trap
to the SNMP manager. The default is public and allows all requests.
Type the IP address of the station to which you want the NWA to send
SNMP traps.
Chapter 16 Remote Management Screens
207