Rogue Ap Screen - ZyXEL Communications NWA-3160 - V3.70 Manual

Chapter 15 Rogue AP Detection
Table 53 Rogue AP Friendly AP
LABEL
Radio Mode
Security
Last Seen
Description
Delete

15.2.2 Rogue AP Screen

Use this scren to display details of all wireless access points within the NWA's
coverage area. Click Rogue AP > Rogue AP. The following screen displays.
Figure 112 Rogue AP
The following table describes the labels in this screen.
Table 54 Rogue AP
LABEL
Rogue AP List
Refresh
Index
Select
196
DESCRIPTION
The field displays the radio mode the AP is currently using.
This field displays the type of wireless encryption the AP is
currently using.
This field displays the last time the NWA scanned for the AP.
This is the description you entered when adding the AP to the list.
Click this button to remove an AP's entry from the list.
DESCRIPTION
This displays details of access points in the NWA's coverage area
that are not listed in the friendly AP list (see
page 195)
Click this button to have the NWA scan for rogue APs.
This is the index number of the AP's entry in the list.
Use this check box to select the APs you want to move to the
friendly AP list (see Section 15.2.1 on page
Section 15.2.1 on
195)
NWA-3160 Series User's Guide