ZyXEL Communications NWA-3160 - V3.70 Manual page 339

Click the DNS Configuration tab.
3
• If you do not know your DNS information, select Disable DNS.
• If you know your DNS information, select Enable DNS and type the
information in the fields below (you may not need to fill them all in).
Figure 201 Windows 95/98/Me: TCP/IP Properties: DNS Configuration
Click the Gateway tab.
4
• If you do not know your gateway's IP address, remove previously installed
gateways.
• If you have a gateway IP address, type it in the New gateway field and click
Add.
Click OK to save and close the TCP/IP Properties window.
5
Click OK to close the Network window. Insert the Windows CD if prompted.
6
Turn on your NWA and restart your computer when prompted.
7
Verifying Settings
Click Start and then Run.
1
In the Run window, type "winipcfg" and then click OK to open the IP
2
Configuration window.
NWA-3160 Series User's Guide
Appendix C IP Addresses and Subnetting
339